McIntosh MEN220 Connection Diagram

MEN220 Connection Diagram
1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04116400
IR Sensor
Note: Refer to the MEN220 Owner’s
Manual page 9 for additional
connection information.
Connection Legend:
Data Cable*-
Sensor/Keypad Cable -
Power Control Cable* -
Audio Signal Cable -
Video Signal Cable -
RF Signal Cable -
Digital Signal Cable -
RS232 Cable -
Ground Wire -
AC Power Cords -
Loudspeaker Cable -
* 2 conductor shielded with 1/8 inch
stereo mini phone plug on each end.
Power Amplifier 1 (Partial View, Right Channel) Power Amplifier 2 (Partial View, Left Channel)
Loudspeaker (Partial View, Right Channel) Loudspeaker (Partial View, Left Channel)
Preamplifier
Controller (Preamplifier)
Connect to
AC Outlet
-
+
-
+

McIntosh MEN220 Specifications

General

Amplifier class	-
Frequency range	20 - 20000 Hz
Output impedance	50 Ω
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.002 %
Purpose	Home
Product color	Black
Connectivity technology	Wired
Built-in display	Yes
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	35 W

Weight and Dimensions

Depth	457.2 mm
Width	444.5 mm
Height	152.4 mm
Weight	11600 g