Need help?Do you have a question about the McIntosh MS120 and is the answer not in the manual?
Read all instructions, retain manual, adhere to warnings, avoid rain/moisture, caution for high sound pressure levels.
Professional installation recommended, locate away from heat sources, mount as described in manual.
Connect to specified amplifier type, route cords to prevent pinching or damage.
Refer to qualified personnel for damage, malfunction, or performance changes; use specified replacement parts.
Clean with a dry cloth, do not insert objects, and avoid spilling liquids into openings.
Details on smooth frequency response, low distortion, high sensitivity, and high power handling for McIntosh subwoofers.
Highlights patented LD/HP Technology, Die Cast Frames, High Power Handling, Extended Cone Excursion, and material quality.
Use custom enclosures built to recommendations, preferably with high-density particleboard and bracing.
Provides detailed dimensions for Sealed and Ported High Pass System enclosures for MS100 and MS120 models.
Offers enclosure dimensions for Sealed Band Pass Systems for both MS100 and MS120 subwoofers.
Illustrates connecting MS100 in stereo mode and MS120 in bridged mode to McIntosh Power Amplifiers.
Lists key parameters like Maximum Music Power, Frequency Response, Sensitivity, Impedance, and Resonance.
Details voice coil resistance, piston area, flux density, impedance, efficiency, compliance, mass, and motor characteristics.
Provides overall dimensions, mounting depths, hole diameters, occupied volume, and net/shipping weight.
Guide for repacking equipment using original cartons and interior parts for safe shipment.
Lists part numbers for shipping cartons, foam pads, centering protectors, and polybags for MS100 and MS120.
To Next Page
General