To Next PageTo Next Page
Need help?Do you have a question about the McIntosh MX 110 and is the answer not in the manual?
General| Frequency Range (FM) | 88 - 108 MHz |
|---|---|
| Tuning Type | Manual |
| Total Harmonic Distortion (FM) | 0.5% |
| Signal-to-Noise Ratio (FM) | 70 dB |
| Signal-to-Noise Ratio (AM) | 50 dB |
| Output Voltage | 2.5V |
| Total Harmonic Distortion (AM) | 1.0% |
| Frequency Range (AM) | 540 - 1600 kHz |
| Response | 20 - 20, 000 Hz |
Adjusts IF transformer windings for optimal output voltage.
Adjusts capacitive coupling for eye closure.
Adjusts discriminator transformer for zero volts.
Repeat discriminator core adjustment if needed.
Adjusts oscillator trimmer capacitor for maximum output.
Tunes oscillator coil slug for accurate dial calibration.
Adjusts mixer and RF trimmers for peak performance.
Tunes mixer and RF coil slugs for optimal output.
Adjusts muting control to eliminate background noise.
Tests unit sensitivity using a distortion analyzer.
Adjusts the 67KC trap for minimum voltage.
Adjusts 19KC phase coil and transformer for maximum output.
Adjusts 38KC transformer bottom core for maximum voltage.
Adjusts 38KC transformer upper core for stable display.
Adjusts 19KC phase coil for maximum separation.
Checks rejection of 19KC and 38KC frequencies.
Verifies the MPX indicator light operation.
Lists all vacuum tubes used in the MX 110.
Lists transistor components used in the MX 110.
Lists diode components used in the MX 110.
Lists all control potentiometers and switches with their functions.
Lists all switches used in the MX 110 with their functions.
Lists all transformers used in the MX 110 with their functions.
Lists all capacitors with their values, voltage, and tolerance.
Lists all coils used in the MX 110 with their values.
Lists special resistors with their values and tolerances.
Lists other miscellaneous parts and accessories.
Details physical dimensions, weight, and finish.
Lists performance metrics for the FM tuner section.
Lists performance metrics for the multiplex decoder.
Details audio performance metrics like response and distortion.
