3
MECHANICAL SPECIFICATIONS
Dimensions
Chassis: 16 inches wide; 5
7
/
16
inches high;
13 inches deep including connectors.
Front Panel: 16 inches wide; 5
7
/
16
inches high.
Knob Clearance: 1½ inches.
Weight
Chassis: 27½ pounds.
Shipping Weight: 36 pounds.
TUNER SPECIFICATIONS
Sensitivity
Better than 2.5 microvolts at 100% modula-
tion.
R.F. Amplifier
Cascode.
LF. Amplifiers
Four.
Limiters
Two.
LF. Bandwidth
200KC flat top.
LF. Transformers
Mechanically captive.
Muting
LF. injected.
Tuning Indicator
Tuning is indicated by an electron ray tube.
MULTIPLEX DECODER SPECIFICATIONS
MPX Decoder
Hum Level: Better than 60db below 100%
stereo modulation.
Distortion: Less than 0.3% (Multiplex De-
coder only).
Channel Separation: Better than 30db at
1000 cps.
AUDIO SPECIFICATIONS
Inputs
Total 5 each channel:
AUX.;
PHONO 1 MAG. or XTAL;
PHONO 2 MAG.;
TAPE HEAD;
TAPE MONITOR.
Outputs
Main Stereo Outputs, 1 Tape Stereo Output,
1 L+R Output.
AC AUX
Outlets
1 unswitched, 2 switched.
Suppression of Pilot (19KC), and Carrier
(38KC): Greater than 40db below 100%
modulation.
Front Panel Stereo Indicator Light: Acti-
vated by 19KC pilot carrier only.
Frequency Response
Within ± 1db 20 to 20,000 cycles. (Including
75 microseconds deemphasis.)
Hum
Greater than 70db or more below 100%
mod. (Audio tubes have D.C. on the fila-
ments.)
Drift
Less than 25 KC.
Ant. Input Impedance
300 balanced, 75 ohms unbalanced.
Radiation
Substantially below F.C.C. requirements.
Distortion
Less than 0.6% distortion at 100% modula-
tion, ± 75KC deviation above 2.5 micro-
volts at antenna.
Finish
Anodized gold and black (front panel).
Installation
Convenient, professional PANLOC.
To Next Page
Loading...
