McKINLEY T34 A Guide For Patients & Carers

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

You must contact your nurse if:

 The pump gets wet

 The pump is dropped

 The colour of the medicines in the tubing

or syringe have changed

 There is cloudiness or there are bits

in the tubing or syringe

 The skin around the cannula is red, swollen or sore

 Liquid leaks where the cannula goes into the skin

 The tubing or syringe appears wet

 Cannula has fallen out

 Tubing is not connected to the cannula and/ or syringe

 The alarm sounds.

_____________________________________________________

If you are at home, phone the community nurse or

the Out of Hours Service as soon as possible.

_____________________________________________________

Useful Contact Details

Community Nurse: ......................................................................................

Out of Hours Service: .................................................................................

GP: ................................................................................................................

Other

Who: ...................................................... Tel: ..............................................

Who: ..................................................... Tel: ..............................................

Important information about your

McKinley T34 Syringe Pump

A Guide for Patients & Carers

v1 2018

Other manuals for McKINLEY T34

Operation Manual26 pages

Questions and Answers:

S
Sarah CooperJul 28, 2025
Why won't my McKINLEY Water Pump start?
- M
  Maria CollinsJul 28, 2025
  If your McKINLEY Water Pump won't start, there are several possible causes. First, check if a battery is present and properly aligned. If the battery is depleted or very low, replace it with a new one. If these steps don't resolve the issue, the pump may be faulty and require servicing.
M
Mark WhiteAug 7, 2025
What to do if McKINLEY Water Pump stops before emptying syringe?
- P
  Paul NicholsonAug 7, 2025
  If the McKINLEY Water Pump stops before emptying the syringe, it could be due to an exhausted battery. Try fitting a new battery, turning the pump on, confirming the syringe size and brand, and selecting 'resume' to continue the infusion. Alternatively, the infusion set may be blocked or trapped, requiring you to clear the occlusion.
J
Joann SchmittAug 16, 2025
How to fix infusion rate issues with McKINLEY Water Pump?
- L
  lynndiazAug 17, 2025
  If the infusion rate of your McKINLEY Water Pump is incorrect, either too fast or too slow, first check the displayed rate against the prescription and change it if necessary. It could also be due to confirming the wrong syringe brand during setup; user retraining is required to prevent this. If neither of these resolves the issue, the pump might be faulty or incorrectly calibrated, requiring service or calibration.

McKINLEY T34 Specifications

General

Brand	McKINLEY
Model	T34
Category	Medical Equipment
Language	English