EasyManua.ls Logo

MCM Electronics 555-11600 - Safety Information; Safety Precautions; Important Usage Guidelines

MCM Electronics 555-11600
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Information
The lightning bolt within
a triangle is intended to
alert the user to the
presence of un insulated
dangerous voltage levels
within the product’s
enclosure.
This voltage may be of
sufficient magnitude to
constitute an electric
shock risk.
To reduce the risk of electric
shock, do not remove cover of
this device. There are no user
serviceable parts inside. Refer
servicing only to qualified
service personnel.
The exclamation point
within a triangle is
intended to alert the
user to important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
Safety Precautions
Read and retain these instructions
Follow all instructions and heed warnings
Do not use this device near water
If the surface becomes dirty, clean only with dry cloth, do not use solvents or
thinners
Install in accordance with the manufacturer’s instructions
Do not block ventilation openings
Do not install near heat sources such as radiators, heat registers, stoves, or other
devices that produce heat
Do not defeat the safety purpose of the grounded plug. This plug has two blades
and a third ground prong. The wide blade or third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet
Protect the power cord from being stressed at the plugs, convenience receptacles,
and where they exit the amplifier
Only use accessories specified by the manufacturer
Unplug the device during lightning storms or when unused for an extended time
Refer all servicing to qualified personnel
This device must not be exposed to water in any way. No object filled with liquids
should be placed on apparatus
Important
These speakers are intended for stationary use on flat, level and solid surfaces. When using
with speaker stands, it is the responsibility of the user to be certain the stand is capable of
supporting the weight of the speaker. When used on elevated stages, whether with or without
speaker stands, care should be given if placed close to the front edge of the stage, as
potential risk exists for spectators in close proximity. Additionally, these are not intended for
flying installations. They should not be retrofitted with flying hardware for support above
stages. Ultimately, it is the sole responsibility of the user to determine safe location and
placement of this or any speaker system.