1. Please prepare a carpet or mat to protect your floor. You need to
spread out all the accessories.
2. Pleaseprepare a pair of gloves to avoid being scratched by sharp
wooden sawdust that may occur during installation.
3. Please open all the boxes to check that the accessories are complete
and in good condition (The accessories list in page 3).
4. The box contains some small components, please place them
properly before installation to keep them away from kids and ensure
safety.
5. If you need to use power tools to install this product, please set the speed to low speed in advance. Due to the characteristics
of wood products, the use of high speed during installation is probably to damage the wood.
6. When installing, please align all the holes and do not tighten all the screws first, otherwise it may make the installation
difficult.
Ⅳ. INSTALLATION PREPARATION
2
To Next Page
Loading...
