McQuay MDB150B1 User Manual (English)

Questions and Answers:

V
Victor BaxterAug 10, 2025
Why is my McQuay MDB150B1 Air Conditioner not cooling properly?
- W
  webertimothyAug 10, 2025
  If your McQuay Air Conditioner is running but not cooling effectively, several factors could be the cause. First, make sure the thermostat isn't set too high; try resetting it. Ensure all doors and windows are completely closed. If these steps don't help, there might be an obstruction blocking the unit's inlet or outlet; remove any objects you find. For issues such as a dirty condenser coil or insufficient refrigerant, it is best to contact your local dealer.
T
Tony WaltersAug 16, 2025
What to do if both fan and compressor on my McQuay MDB150B1 Air Conditioner don't work?
- C
  cynthia56Aug 16, 2025
  If neither the fan nor the compressor is working on your McQuay Air Conditioner, there are a few things you can check. First, there may be a power failure; the unit should resume operation when the power supply is restored. Also, the starter may have tripped; try resetting it. Finally, inspect the fuse in the power switch or operating unit and replace it if it's blown.
Y
ynicholsAug 25, 2025
How to fix a McQuay Air Conditioner when the fan is not working?
- J
  Joanne ComptonAug 25, 2025
  If the fan on your McQuay Air Conditioner isn't working, start by checking the power supply. If the power supply is fine, the issue might be a faulty fan capacitor or fan motor, in which case you should contact your local dealer. Another potential cause is a faulty switch, which would need to be changed.
D
Derrick SmithSep 1, 2025
What to do if McQuay MDB150B1 Air Conditioner fan works, but the compressor doesn't?
- V
  Virginia GoodmanSep 1, 2025
  If the fan on your McQuay Air Conditioner is working, but the compressor isn't, there are a few potential reasons. First, the thermostat setting might be too high; try resetting it. It's also possible that the dual pressure control has tripped; in this case, reset the pressure control. For compressor or compressor contractor issues, contact your local dealer.