is canceled.
Timer off setting under on-state of the unit is shown as Fig.5-10
Fig. 5-10 Timer setting under on state of the unit
Timer range: 0.5-24hr. Every press ofŸ or ź button will make setting time increased or decreased by 0.5hr.If press
either of them continuously, setting time will automatically increase/ decrease by 0.5hr every 0.5s.
Note:
1. If both timer on and timer off are set in unit on interface, the wired controller only display time of time off. If both
of them are set in unit off-state, only time of timer on is displayed.
2. Timer on in unit on-state is timed from the time of unit off and timer off in unit off-state is timed from the time of
unit on.
To Next Page
Loading...