Need help?Do you have a question about the MCZ EGO 2.0 AIR and is the answer not in the manual?
Essential safety rules for installation, operation, and maintenance.
How to remove the rear panel for internal access and maintenance.
Step-by-step guide on how to load fuel pellets into the hopper.
Essential checks and precautions before the initial product start-up.
List of integrated safety devices and a warning against tampering.
Table of alarm codes, their causes, and how to resolve them.
Steps to cancel alarms and restore normal operation.
Emphasizes correct installation, maintenance, and cleaning for safe operation.
Simple rules for safe operation and to prevent malfunctions.
Troubleshooting for pellet feed problems and fire going out.
Troubleshooting for operational interruptions and motor failures.
Troubleshooting for fan operation, remote control, and product startup.
General| Type | Pellet Stove |
|---|---|
| Weight | 120 kg |
| Flue Diameter | 80 mm |
| Power Supply | 230 V |
| Power Consumption | 60 W |
| Fuel Type | Pellets |
| Heating power | 8.1 kW |
| Hopper Capacity | 18 kg |
To Next Page