Need help?Do you have a question about the MDB GREEN CLIMBER LV300 Pro EPA and is the answer not in the manual?
Thanks the user and introduces the manual's purpose and importance.
Defines the manual as an integral part of the machine and outlines its copyright.
Explains the manual's goal to provide information for diligent use and maintenance.
Instructions for keeping the manual in good condition.
Provides MDB S.r.l. contact details and technical support phone number.
Details the CE marking and relevant European directives applied to the machine.
Lists key technical specifications of the LV 300 PRO EPA machine.
Lists key technical specifications of the LV 300 PRO EPA machine.
Covers lighting, vibrations, noise, and machine disposal information.
Lists the main components of the machine and provides a general overview of its operation.
Outlines compliance with regulations and work area safety requirements.
Defines the operator's required position relative to the machine.
Lists applicable Italian legal regulations, European directives, and harmonised standards.
Lists applicable Italian legal regulations for machine use.
Lists applicable European directives for machine use.
Lists relevant technical harmonised standards for machinery.
Explains the meaning of safety symbols and warning signs used in the manual.
Explains the meaning of safety symbols and warning signs used in the manual.
Warns about using non-original parts and potential warranty voiding.
Details the meaning of DANGER, CAUTION, and IMPORTANT NOTE symbols.
Warns against maneuvering the machine from below on sloping terrain.
Instructions for checking the functionality of safety devices like emergency stop buttons.
Procedures for verifying machine movement and emergency stop functionality.
Covers procedures for remote control failure and emergency stop interventions.
Procedures for remote control failure and battery replacement.
Explains the use of emergency stop buttons for immediate machine halt.
Explains how the machine is shipped and how to position it upon arrival.
Guides on starting the engine and operating the machine using remote control.
Details the components and functions of Control Panel 1.
Details the components and functions of Control Panel 2.
Step-by-step guide for starting the engine using the control panel key.
Guides on starting the engine using the remote control transmitter.
Explains the meaning of LEDs on the transmitter and receiver for status monitoring.
Describes how to control machine movement (forward, backward, turning) using the transmitter.
Explains functions like speed adjustment and track width modification.
Details functions like equipment ON/OFF, emergency switch, and RPM adjustment.
Provides instructions on how to refuel the machine safely.
Outlines the general maintenance sequence and service symbols.
Lists the general sequence of maintenance tasks.
Explains symbols used to denote maintenance actions.
Lists checks required at the end of each workday and at specific hour intervals.
General cleaning instructions, including cautions for electrical parts and high pressure.
Detailed steps for cleaning the engine air filter.
Instructions for cleaning radiator flaps to maintain cooling capacity.
Daily checks on clamping elements, steel components, and hydraulic system.
Covers lubrication and checks for hydraulic oil, coolant, and engine oil levels.
Instructions for checking and topping up hydraulic oil, including replacement.
Steps for checking and topping up coolant, including composition and fill level.
Procedure for checking and topping up engine oil.
Covers daily checks, wear, and tensioning procedures for machine tracks.
Daily checks for track tension, motor function, and wear.
Procedure for adjusting track tension for proper movement.
Guidelines and schedules for required technical assistance and maintenance.
Outlines required maintenance at different operational hour intervals.
Troubleshoots common issues related to machine operation and remote control.
Troubleshoots common problems related to starting the machine.
Addresses problems with the radio remote control not working or losing signal.
Official declaration of conformity to EU directives.
Official declaration of conformity to EU directives.
Contains information related to the shredder attachment.
Instructions for using the shredder attachment with the machine.
Step-by-step guide on how to attach the shredder to the LV 300 PRO EPA.
Specific safety instructions and precautions when operating the machine with the shredder.
Templates for recording routine and unscheduled maintenance performed on the machine.
Template for recording routine maintenance performed on the machine.
Template for recording unscheduled maintenance performed on the machine.
General| Engine Power | 30 HP |
|---|---|
| Transmission | Hydrostatic |
| Hydraulic System | Open Center |
| PTO Speed | 540 RPM |
| Emission Standard | EPA Tier 4 |
To Next Page
