Need help?Do you have a question about the MDK Med MI 20 Series and is the answer not in the manual?
General| Brand | MDK Med |
|---|---|
| Model | MI 20 Series |
| Category | Medical Equipment |
| Language | English |
Explains the meaning of various icons, labels, and symbols used in the manual and on the device for clear communication.
Guides on how to physically set up and mount the infusion pump and its accessories for use.
Details the procedure for powering on the device and the automatic system self-check process.
Covers how to configure essential infusion parameters like infusion set, mode, VTBI, and flow rate.
Explains the steps for initiating an infusion, including purge and start procedures.
Describes how to stop infusion or alarms and clear them from the system.
Explains the cause, indication, and solution for the door open alarm.
Details the downstream occlusion alarm, its detection, and resolution steps.
Explains how to handle air in line alarms, including detection and removal of air.
Details the alarm for low battery status and how to resolve it.
Instructions on adjusting the screen brightness for optimal visibility.
Guides on setting the volume level for device alarms.
How to select and configure the correct infusion set type for accurate infusion.
Procedure for resetting the device to its default factory configurations.
Step-by-step guide on calibrating the infusion set for precise volume delivery.
To Next Page