MDR-2000
V3
User's Reference Manual
Interactive Monitor
SHOW ALARM - Displays the contents
of
the Alarm Table.
SHOW AUTODIAL - Lists information used by the autodialer including retry thresholds and the
user programmable telephone numbers.
SHOW DIGITS - Displays the contents
of
the Digits Table.
SHOW HELP - Provides a list
of
the SHOW command parameters.
SHOW IDENT - Displays data identifying the MDR-2000 software including PBX generic
supported, software revision, serial number, copyright notice, site number and site name. This
command is an expanded version
of
the AVID command.
SHOW MAINT - Displays maintenance data for diagnostic purposes.
It
is identical to the AVSM
command except that no transmission protocol
is
used.
SHOW PORT - Displays the settings for the RS-232 ports and other miscellaneous data collection
settings on the MDR-2000.
SHOW ST A TUS - This command is identical to the STATUS command described earlier.
ST
A
TUS
- This command outputs a comprehensive display indicating the values
of
the various
parameters within the MDR-2000. The values output are as follows:
5-7
To Next Page
Loading...