Need help?Do you have a question about the MDS LEDR 900S and is the answer not in the manual?
Details the four main requirements for installing radio transceivers.
Discusses the selection criteria for antennas and feedlines for optimal performance.
Describes the front panel indicators, LCD display, and navigation keys.
Details the various connectors on the rear panel of LEDR radios.
Explains the configurable bandwidth, data rates, and modulation types for LEDR radios.
Guides users on powering up the LEDR radios and initial screen display.
Outlines methods for establishing communication with the LEDR radio.
Explains how to perform the initial login using factory default credentials.
Details the process of changing the default SUPER password for security.
Explains how to establish an initial connection to the radio via the console port.
Details firmware upload using the console port and a Windows PC.
Covers firmware upload using Telnet via the Ethernet port.
Describes firmware upload from a remote server using Ethernet.
Explains how the protected system operates, including fault detection and switchover.
Lists technical specifications for LEDR 400S, 700S, 900S, and 1400S models.
Lists technical specifications for LEDR 400F, 900F, and 1400F models.
Provides contact information and procedures for obtaining factory technical assistance.
Explains the process and requirements for returning equipment for factory repairs.
Details the four main requirements for installing radio transceivers.
Discusses the selection criteria for antennas and feedlines for optimal performance.
Describes the front panel indicators, LCD display, and navigation keys.
Details the various connectors on the rear panel of LEDR radios.
Explains the configurable bandwidth, data rates, and modulation types for LEDR radios.
Guides users on powering up the LEDR radios and initial screen display.
Outlines methods for establishing communication with the LEDR radio.
Explains how to perform the initial login using factory default credentials.
Details the process of changing the default SUPER password for security.
Explains how to establish an initial connection to the radio via the console port.
Details firmware upload using the console port and a Windows PC.
Covers firmware upload using Telnet via the Ethernet port.
Describes firmware upload from a remote server using Ethernet.
Explains how the protected system operates, including fault detection and switchover.
Lists technical specifications for LEDR 400S, 700S, 900S, and 1400S models.
Lists technical specifications for LEDR 400F, 900F, and 1400F models.
Provides contact information and procedures for obtaining factory technical assistance.
Explains the process and requirements for returning equipment for factory repairs.
To Next Page
General