Need help?Do you have a question about the MDV KJR-120X1/TFBG-E and is the answer not in the manual?
Guidance on choosing an appropriate installation site.
Checklist for confirming supplied parts before installation.
Preparing necessary components like switch box and wiring tubes.
Safety guidelines for wiring the remote controller.
Detailed dimensions of the wired remote controller unit.
Steps to detach the front cover of the controller.
Instructions for mounting the controller's back plate.
Procedure for installing the internal battery correctly.
Steps for connecting the controller to the indoor unit.
Visual guide for the controller's wiring connections.
Guide for reassembling the controller's cover after wiring.
Step-by-step guide to set the controller's date and time.
Basic procedure for turning the unit on and off.
How to select different operating modes like Auto, Cool, Heat.
Adjusting the target room temperature.
How to select desired fan speed levels.
Enabling or disabling the audible feedback for button presses.
Activating or deactivating the button lock feature.
Controlling the louver direction for airflow.
Adjusting vertical airflow direction.
Using special modes like Turbo and Follow Me.
Configuring timed start or stop for the unit.
Scheduling both start and stop times for operation.
Initial setup for the weekly timer.
Selecting specific days for timer programming.
Programming the start time for a scheduled event.
Programming the stop time for a scheduled event.
Activating and deactivating the weekly timer function.
Temporary or permanent shutdown while timer is active.
Designating specific days as non-operational.
Adjusting the timer's delay for turning off.
Duplicating timer settings to other days.
Initial setup for the second weekly timer.
Selecting days for the timer.
Programming the start time for timer events.
Setting the specific time for an event.
Selecting the operating mode for the timed event.
Setting the desired temperature for the timed event.
Setting the fan speed for the timed event.
Activating and deactivating the weekly timer.
Designating specific days as non-operational for the timer.
Duplicating timer settings to other days.
Removing specific scheduled timer events.
Adjusting temperature readings for the 'Follow Me' feature.
Defining the operational temperature limits.
Enabling or disabling remote control signal reception.
Resetting the controller to its default configuration.
General| Brand | MDV |
|---|---|
| Model | KJR-120X1/TFBG-E |
| Category | Remote Control |
| Language | English |
To Next Page
