Need help?Do you have a question about the MDV MOBA30-12CFN1-BP0W and is the answer not in the manual?
Details different indoor and outdoor unit model numbers.
Provides detailed technical specifications for various unit components.
Provides dimensions for various indoor and outdoor unit models.
Details wiring diagrams and abbreviations for indoor and outdoor units.
Illustrates the refrigerant cycle for cooling operations.
Presents cooling capacity data for different operating conditions.
Illustrates noise levels of indoor and outdoor units across frequencies.
Lists electrical specifications for indoor/outdoor units and compressor.
Explains various operating modes and their functions.
Describes the functions and buttons of the remote controller.
Lists all included accessories with their quantities and shapes.
Provides a step-by-step guide for the installation process.
Guides on selecting appropriate locations for unit installation.
Details the process of mounting the indoor unit.
Instructions for connecting signal and power cables.
Covers service space, bolt pitch, and mounting of the outdoor unit.
Step-by-step guide for installing the drain joint for the outdoor unit.
Covers pipe requirements and connection procedures.
Explains the importance of removing moisture and air from the system.
Details the process of adding refrigerant based on pipe size and length.
Covers electrical safety and leak detection procedures.
Outlines the steps for performing a test run of the unit.
To Next Page
General