Why are the brakes not functioning adequately on my Me-Mover Stepper Machine?
The brakes on your Me-Mover Stepper Machine might not be working well because they are too loose or the brake pads are worn out. If the brakes are too loose, adjust them. If the brake pads are worn, you should change them.
What to do if the brake handle does not return to original position on Me-Mover Stepper Machine?
If the brake handle on your Me-Mover Stepper Machine doesn't return to its original position, it could be due to several reasons. The brake cables might be tangled, preventing free movement. Try re-bending the brake cable housing. Also, check if the handlebar has been rotated more than 180 degrees, and twist the handlebar to untwist the cables. Another cause might be corrosion of the outer casing, in this case, replace the brake cables.
General| Brand | Me-Mover |
|---|---|
| Model | FIT |
| Category | Fitness Equipment |
| Language | English |
To Next Page
