Why are the brakes not functioning adequately on my Me-Mover Stepper Machine?
The brakes on your Me-Mover Stepper Machine might not be working well because they are too loose or the brake pads are worn out. If the brakes are too loose, adjust them. If the brake pads are worn, you should change them.
What to do if the brake handle does not return to original position on Me-Mover Stepper Machine?
If the brake handle on your Me-Mover Stepper Machine doesn't return to its original position, it could be due to several reasons. The brake cables might be tangled, preventing free movement. Try re-bending the brake cable housing. Also, check if the handlebar has been rotated more than 180 degrees, and twist the handlebar to untwist the cables. Another cause might be corrosion of the outer casing, in this case, replace the brake cables.
Why I cannot rotate the steering column / handlebar on my Me-Mover Stepper Machine?
If you cannot rotate the steering column or handlebar on your Me-Mover Stepper Machine, it's likely due to twisted brake cables. To resolve this, simply turn the steering column to untwist the cables.
How to fix the transmission slanting inwards on my Me-Mover Stepper Machine?
If the transmission on your Me-Mover Stepper Machine slants inwards, it's probably because the transmission screws are not securely tightened. Use a 5mm hex key to untighten the transmission bolts, adjust the transmission to a vertical position, and then tighten the bolts again.
Defines the WARNING symbol and its implication of potential serious injury or death.
Defines the CAUTION symbol and its implication of property damage or warranty voidance.
Explains its use for securing the front wheel to the front fork.
Explains its use for adjusting the steering column height for different users.
Stresses the importance of adhering to local traffic laws and regulations for safe riding.
Recommends wearing a helmet and protective gear like knee and elbow pads for injury prevention.
Advises using reflectors, lights, and bright clothing for visibility, especially at night.
Provides a list of common-sense safety tips and precautions to prevent accidents while riding.
Advises using a secure lock and looping it through the centreblock and front wheel to prevent theft.
Advises practicing sufficiently before riding in traffic or challenging terrain, and always wearing protective gear.
States that special tools are necessary for assembly and adjustment of the Me-Mover FIT.
Warns against using non-approved parts or modifications, advising to contact support for clarification.
Outlines a maintenance schedule based on usage, recommending annual servicing and checking for wear.
Explains the importance of lubricating chains and the locking bolt for safe operation.
Provides a daily checklist for pre-ride safety checks, including brakes, straps, and wheels.
Lists weekly maintenance tasks, such as checking tyre pressure and lubricating the locking bolt.
Details the weekly procedure for lubricating the locking bolt to prevent jamming from dirt or sediment.
Explains how to lubricate the wheel chain by applying lubricant to the transmission cover hole.
Explains torque as screw tightness and lists specifications, cautioning against over-tightening aluminium screws.
Warns against heightening past the mark, which can weaken stability and cause injury.
Introduces the brake system, disc brakes, and the importance of their maintenance for safety.
Details how to check brake function, handle tension, and pad-to-disc clearance.
Provides step-by-step instructions for adjusting brake handle tension and cable caliper position.
Describes the locking bolt, its function in the folding mechanism, and the importance of lubrication.
Emphasizes the critical importance of ensuring the centre block screw is always tightened for safety.
Warns against pinching the tube between the rim and the tyre.
Warns that unsecured transmission screws can cause severe injury to ankles.
Lists possible causes and solutions for a jammed locking bolt, including lubrication and cleaning.
Identifies loose centre block screws as a cause for jolts during braking.
Lists potential causes for wiggling, such as loose tyres or improper alignment.
Addresses loose front and rear wheels, suggesting tightening quick releases and centre block screws.
Covers issues with brake function, including loose brakes or worn pads.
General| Brand | Me-Mover |
|---|---|
| Model | FIT |
| Category | Fitness Equipment |
| Language | English |
To Next Page
