Me-Mover Speed - Mounting the Handlebars

13
ME-MOVER.COM
2. Remove the top cap. Firstly remove the dust cap. Put this somewhere safe. Then, use
the 5mm hex key anticlockwise to unscrew and remove the top cap.
Steering column
quick release OPEN
1. Mount the handlebars. Release the quick release and pull out the inner steerer. Pull
it out roughly 10cm. Whilst holding the steerer, lock the steering column quick release in
place.
Important: The quick release needs to
be locked rmly to avoid loosing the inner
steerer into the front column!
STEP FOUR: MOUNTING THE HANDLEBARS
Steering column
quick release CLOSED
Inner steerer
Top cap
Dust cap