23
ME-MOVER.COM
The Me-Mover FIT oers a totally unique riding feel that requires only minutes to learn.
Follow these simple instructions to start riding your new Me-Mover Speed.
1. Wear a helmet.
2. Find an area without trac to practice in. Ensure that it is a straight, safe stretch with a
at surface.
WARNING!
Do not try the Me-Mover Speed in a crowded or high-trac area for the rst time.
instruction video
3. Adjust the handlebar height to a comfortable position before mounting the Me-Mover
Speed. Release the steering column quick release clamp. This will allow you to slide the
steering column up and down to your desired height.
Hold the clamp OPEN while you rotate the nut in a clockwise direction. Rotate the nut
until you cannot close the clamp anymore. At this point release the nut slightly so you
can JUST close the clamp.
WARNING!
Always be sure that the quick release is fastened securely! For detailed instructions
refer to “How To Use The Quick Releases” on page 7.
WARNING!
Do not heighten past the maximum mark. If the maximum mark on the inner steerer
is visible you have heightened it too much. This will weaken the stability of the inner
steerer and will risk injury and/or damage to your Me-Mover Speed.
Hold the clamp
OPEN position
RIDING INSTRUCTIONS
To Next Page
Loading...