Need help?Do you have a question about the Me TS-D200 Series and is the answer not in the manual?
Details the physical connectors on the TS-D200/me-D350, including the DB-15 and BNC antenna ports.
Details pins for data modulation input (Pin 1, 2) and PTT input (Pin 3).
Describes pins for data output (Pin 5), busy status (Pin 6), and audio input/monitor (Pin 7).
Covers pins for serial commands (Pin 8) and RS232 data I/O for option modules (Pin 10, 11).
Details pins for channel selection (Pin 12, 15), lock detection (Pin 13), and GPS data (Pin 13, 14, 15).
Explains pins for power input (Pin 14), RSSI level (Pin 7), and buffer status (Pin 12).
Describes how the radio enters transmit mode using PTT, serial commands, or data input.
Details the asynchronous format for serial commands, including baud rate and data structure.
Outlines the structure for sending commands and receiving acknowledgments or errors.
Details PC programmability for frequency, channels, radio settings, and module options.
Minimizes human exposure to RF energy by limiting transmission time and maintaining antenna separation.
Warns against operating the modem in potentially explosive environments due to spark risk.
General| Frequency Range | 400-470MHz |
|---|---|
| Number of Channels | 16 |
| Waterproof Rating | IP54 |
| Weight | 220g |
| Operating Temperature | -20°C to +60°C |
To Next Page