Need help?Do you have a question about the Meade DS-114 and is the answer not in the manual?
Steps to attach tripod legs to the yoke mount for smaller telescope models.
Steps to assemble cradle rings and attach the optical tube for larger telescope models.
Steps to check optical alignment by looking down the focuser drawtube.
Procedure to adjust the secondary mirror for centering within the drawtube.
Steps to rotate the secondary mirror holder for proper primary mirror reflection.
Procedure to adjust primary mirror tilt screws for centered eye reflection.
Description and usage of manual tracking controls for telescope movement.
Installation and operation guide for the electronic dual-motor system.
Overview of the Autostar computer control system for object location.
Steps to attach tripod legs to the yoke mount for smaller telescope models.
Steps to assemble cradle rings and attach the optical tube for larger telescope models.
Steps to check optical alignment by looking down the focuser drawtube.
Procedure to adjust the secondary mirror for centering within the drawtube.
Steps to rotate the secondary mirror holder for proper primary mirror reflection.
Procedure to adjust primary mirror tilt screws for centered eye reflection.
Description and usage of manual tracking controls for telescope movement.
Installation and operation guide for the electronic dual-motor system.
Overview of the Autostar computer control system for object location.
General| Aperture | 114 mm |
|---|---|
| Focal Length | 1000 mm |
| Focal Ratio | f/8.8 |
| Mount Type | Altazimuth |
| Optical Design | Newtonian Reflector |
| Eyepieces Included | MA9mm, MA25mm |
| Finderscope | Red dot finder |
To Next Page