EasyManua.ls Logo

Mearth S PRO - Specifications and Maintenance; Product Specifications; Maintenance and Storage

Mearth S PRO
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-16--15-
Maintenance considerations
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
If the storage environment temperature is lower than 0 , please don't charge electric scooter. Please put it in inside
environment temperature (above 10 ) and then charge, storage temperature is - 10 to 35 ℃.
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
In order to protect the user's safety, the user can not take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
10 inch
1083*420*1186mm
1083*420*460mm
115mm
15kg
36V/350W
30-45km
15°
100-240Vac
50-60Hz
42V
2A
-10℃-35
Input voltage
Frequency
Output voltage
Output current
Store temperature
Capacity
Moto power
Mileage per charge
Max speed
Max loading
Climbing angle
Unfolded size
Folded size
Height from pedal to ground
Net weight
Item
Product
6 Maintenance
5 Specification
36V/10Ah
25-32km/h
110kg

Related product manuals