Need help?Do you have a question about the mecalac TA3H and is the answer not in the manual?
Manual instructions for safety and machine performance.
Identifies safety messages and symbols for hazard avoidance.
Machine designed for transporting free-flowing materials.
Guide to safe operation, controls, and maintenance.
Location of the Vehicle Identification Number (VIN) plate.
Warning regarding exposure to harmful substances as per CA law.
Hazard classification system for US, CA, AU, NZ safety signs.
Required PPE for operating and maintenance based on site conditions.
General safety precautions for operators, supervisors, bystanders, and machine.
Importance of seat belt for operator safety; must be worn at all times.
Hazards of battery acid and safety measures.
Safe operation on slopes, maximum gradients, and crossing slopes.
Visual guide to ISO safety sign locations on the machine.
Visual guide to ANSI safety decal locations on the machine.
Physical dimensions of the TA3H model.
Turning circle specifications for different models.
Specifications for engine, transmission, axles, tyres, brakes, electrical and hydraulic systems.
Noise emission levels according to ISO 4871.
Image and title for TA3H forward tip skip.
Image and title for TA3SH swing skip.
Description of the two-part articulating chassis.
Explanation of the hydrostatic steering system.
Explanation of the hydrostatic drive transmission system.
Function and operation of the battery isolator.
Identification and function of control panel elements.
Safety feature preventing engine start without operator seated.
Details on standard and retracting seat belts, including beacon warning.
Procedures and safety for loading using ramps.
Function and procedure for fitting the articulation lock.
Procedure for securing the machine on a trailer or lorry.
Essential checks upon machine delivery.
Procedure for setting up the ROPS in the work position.
Daily checks before starting the machine.
Procedure for positioning the ROPS correctly.
Adjustments for operator comfort and safety.
Procedure for starting the engine.
Safe operation of the skip for tipping and discharging loads.
Steps for safely parking the machine.
Procedure for refueling on a slope.
Procedure for jump-starting the machine safely.
Procedure for setting pump to freewheel mode for towing.
General precautions before performing maintenance.
Procedure for fitting the articulation lock.
Procedure for removing the battery.
Daily maintenance and servicing of the air cleaner.
Checking and adding engine oil.
Brake arrangement and maintenance procedures.
Service schedules based on operating hours.
Lubrication points and schedule for forward tip skip.
Common issues and solutions for engine starting and operation.
Troubleshooting electrical system faults.
Troubleshooting hydraulic system issues.
Procedures and cautions for towing the machine.
Procedures for preparing the machine for storage.
Procedures for disassembling and disposing of the machine.
Definitions of technical terms used in the manual.
Contains electrical diagrams for the machine.
Contains hydraulic diagrams for the machine.
To Next Page
General