To Next PageTo Next Page
Need help?Do you have a question about the Mecc Alte ECO 28 S and is the answer not in the manual?
Describes ECO series generators, their brushless design, and construction compliance with CEE directives.
Outlines essential safety precautions, including ensuring the generator is stationary and disconnected.
Warns of risks to the machine if safety standards are not followed.
Warns of risks to machine and personnel if safety standards are not met.
Warns of serious injury or death if safety standards are not met.
Warns of immediate risk of serious injury or death if safety standards are not met.
Generator must be properly grounded as per country regulations.
Final installer must provide all necessary safety protections.
Avoid loose clothing; never run generator with guards removed.
Install in soundproof rooms; wear hearing protection; allow cooling before touching.
Generator is IP21 rated; do not use water jets or liquids on electrical parts.
Details star (Y) and delta (Δ) connections and how to switch between them.
Instructions for adjusting voltage and implications of frequency changes (50Hz/60Hz).
Information on U.V.R.6/1-F and S.R.7/2-G regulators, their features and applications.
Details underspeed and overload protections, their adjustable thresholds, and LED indicators.
Instrumentation for starting, running, and stopping is installer's responsibility.
Operations must be carried out by skilled personnel who have read safety instructions.
During first start-up at reduced speed, check for anomalous noises.
All maintenance must be authorized by safety rep and done on a stopped, insulated machine.
Assess windings condition by measuring insulation resistance; disconnect components first.
Checks for fuse, speed, and electronic regulator connections when the generator doesn't excite.
Adjust voltage, check speed, and inspect windings if low voltage occurs at no load.
Adjust voltage or substitute regulator if high voltage occurs at no load.
Reset voltage, check current, power factor, speed, or diodes if voltage is low under load.
Reset voltage or substitute regulator if voltage is high under load.
Check rotation uniformity and adjust stability potentiometer ('STAB').
General| Brand | Mecc Alte |
|---|---|
| Model | ECO 28 S |
| Category | Portable Generator |
| Language | English |
