Need help?Do you have a question about the Mecc Alte ECO43 Series and is the answer not in the manual?
Outlines user responsibilities for safe operation and maintenance.
Details conditions that invalidate the product warranty.
Provides contact information and required data for support.
Explains how to identify the machine and its components via its data plate.
Describes the composition of the documentation package.
Explains warning symbols, levels, and text conventions for clarity.
Defines the proper application and scope of the alternators.
Specifies user duties for safe installation, operation, and maintenance.
Categorizes users and defines their specific responsibilities and qualifications.
Lists essential rules for safe operation, environment, and machine protection.
Highlights potential hazards and necessary precautions during operation.
Provides an overview of the alternator's design and general characteristics.
Details the function and features of the DER2 digital voltage regulator.
Lists optional components like heat exchangers and sensors.
Presents key technical specifications and performance data of the alternators.
Provides specific resistance values for windings under different conditions.
Lists physical dimensions and weight specifications for different models.
Covers methods for safe packaging, lifting, and handling of the alternators.
Guides on proper mounting, alignment, and electrical connections for installation.
Specifies the correct rotational direction for safe and efficient operation.
Details procedures for aligning and coupling the alternator with the engine.
Provides instructions for safe and correct electrical wiring and connections.
Explains how to configure temperature settings for winding and bearing protection.
Outlines essential checks to perform after the alternator is installed.
Guides on how to calibrate the voltage regulator for stable operation.
Lists specific torque values for various screws and fasteners.
Step-by-step guide for starting up the alternator for the first time.
Details the correct procedure for safely shutting down the alternator.
Specifies the schedule and types of maintenance required for optimal performance.
Covers inspection, drying, cleaning, and testing of the alternator windings.
Provides procedures for measuring insulation resistance to ensure safety.
Details lubrication and replacement procedures for bearings.
Covers visual inspections, filter checks, and component verification.
Outlines steps to verify the correct functioning of the voltage regulator.
Explains the procedure for removing the disc holder hub for maintenance.
Provides detailed instructions for disassembling the ECO43 and ECO46 alternators.
Offers step-by-step guidance for reassembling the alternators.
Covers cleaning procedures for the alternator and its surroundings.
Lists common electrical issues, probable causes, and solutions.
Addresses mechanical issues, their causes, and corrective actions.
Provides a list of parts and their codes for ordering replacements.
Outlines the initial steps for safely removing the alternator from service.
Details the process of dismantling the machine for disposal or recycling.
Provides guidelines for storing the alternator for short and long terms.
Explains the environmentally responsible procedures for disposing of the machine.
Lists accompanying diagrams and drawings for reference.
Lists documentation related to specific installed components.
General| Poles | 4 |
|---|---|
| Protection Degree | IP23 |
| Insulation Class | H |
| Power Factor | 0.8 |
| Frequency | 50 Hz |
| Engine Speed | 1500 rpm |
| Phase | Three Phase |
To Next Page
