To Next PageTo Next Page
Need help?Do you have a question about the Mecc Alte ECO 28 VL and is the answer not in the manual?
Warns about the danger of short circuits due to incorrect cleaning methods.
Highlights dangers of improper handling, storage, and essential post-storage checks.
Warns about dangers of electrical connections and provides safety guidelines.
Explains underspeed and overload protection mechanisms integrated into the regulators.
Explains the requirement for a paralleling device to ensure equal generator output droop.
Advises checking for abnormal noises during the initial reduced-speed start.
Warns that generators are designed for long maintenance-free operation.
Lists routine tasks including winding checks, functioning assessment, mechanical inspections, and cleaning.
Explains how to check winding insulation resistance using a Megger device.
Explains bearing greasing, maintenance intervals, and checks for wear or damage.
Provides step-by-step instructions for removing the exciter rotor and bearings.
Explains how to replace the diode bridge, including testing individual diodes and proper torque.
Provides troubleshooting steps for when the generator fails to excite or loses excitation.
General| Voltage | 230/400 V |
|---|---|
| Poles | 4 |
| Protection | IP23 |
| Insulation Class | H |
| Phase | 3 |
| Power Factor | 0.8 |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
