Meccanica Benassi MTC 601

To Next Page

READ THIS MANUAL CAREFULLY

MOTOCULTIVATOR - MOTORMOWER

FOREWORD

USE and MAINTENANCE MANUAL

This manual cannot be either reproduced or released without the

manufacturer’s prior written consent.

PRINTED IN ITALY

The machine serial number is printed on the drive box.

IMPORTANT NOTE

Always mention the machine serial number when calling our technical service or when ordering spare parts.

MARKING

The CE mark is on the right side of the gear-box housing. Marking example.

This symbol is used to highlight an important safety information. If

this information is ignored, people are in danger either of possible

injures – even serious ones – or death.

IMPORTANT

This term highlights special precautions to be taken in order not to

damage the machine.

12/07

INDEX

1. FOREWORD Pag. 0

2. IDENTIFICATION AND MARKING Pag. 0

3. CONDITIONS AND USING LIMITS Pag. 1

4. WARRANTY Pag. 1

5. MACHINE STARTING Pag. 2

6. WARNING AND CONTROL SIGNS Pag. 2

7. SAFETY WARNINGS Pag. 3-4

8. ENGINE STARTING Pag. 5

9. CONTROL DEVICES USE Pag. 6

10. WORK STARTING Pag. 7

11. RULES FOR A GOOD WORKING Pag. 7

12. MAINTENANCE AND TROUBLES Pag. 8

13. TECHNICAL DATA Pag. 9

14. ADVICES AND DECLARATION Pag. 10

ENGINE

Use and maintenance instructions of the engine are

mentioned in the relevant manual, whose copy is always

supplied with every machine.

–

IDENTIFICATION AND MARKING

MTC 601

- 0 -

Main Page

Need help?

Do you have a question about the Meccanica Benassi MTC 601 and is the answer not in the manual?

Summary

Foreword and Safety Information

Safety Information Symbol Explanation

Explains the warning symbol for safety information and potential danger.

Identification and Marking

Machine Serial Number Location

Machine serial number is on the drive box; mention it for service or parts orders.

Warranty Information

Authorized Dealer Consultation

Consult authorized dealer for doubts, especially during the warranty period.

Machine Starting and Warnings

Manual Reading Before Starting

Read the entire manual before starting the flail mower.

Warning Signs and Symbols

Explanation of various warning signs (Danger, Attention, Warning) and control signs.

Safety Warnings

Operator and Usage Restrictions

Machine for one operator; no transporting people/objects; no children/inexperienced users.

Pre-Operation Checks

Check controls, safety devices, area clearance, and tighten bolts.

Safe Operation Practices

Keep clear of blades, use correct handlebar position, use original parts, avoid fatigue.

Refueling and Maintenance Safety

Stop engine before refueling; handle fuel carefully; avoid spills and smoking.

Operating Precautions and Safety

Prohibited Modifications

Do not bypass safety devices; modifications void warranty and are dangerous.

Slope Operation Guidelines

Avoid steep slopes (max 30%); travel across slopes, not up/down.

Operator Position and Engine Heat

Engine Starting Procedures

Pre-Start Checks

Check oil levels, air filter, screws, levers in neutral, clutch play, and fuel.

Starting the Machine

Engine Break-in Period

Description of Controls

Clutch Lever

Engine Stop Lever

Safety device on the left handlebar to immediately stop the engine.

Throttle Lever

PTO Lever

Maintenance and Lubricants

Engine Oil Requirements

Check oil every 5 hours, change every 50 hours; use SAE 40 (summer) or SAE 20 (winter).

Gearbox Oil

Cutting Bar and Rotary Tiller Lubrication

Troubleshooting Engine Issues

Engine Not Starting Checks

Verify fuel, fuel plug, cold start procedure, fuel delivery, and carburetor jets.

Spark Plug Ignition Check

Technical Data

Engine Specifications

Gearbox and PTO

Weight and Speed

Noise and Vibrations

Hearing Protection

Wear ear protection as strong noise may damage hearing.

Vibration Effects