5
www. mechmaxx.com
SAFETY
TRANSPORT MACHINERY SAFELY WEAR PROTECTIVE EQUIPMENT
AVOID HIGH PRESSURE FLUIDS HAZARD
INTRODUCTION
APPLICATION
USING THIS MANUAL
KEEP RIDERS OFF MACHINERY
PRACTICE SAFE MAINTENANCE
PREPARE FOR EMERGENCIES
• Comply with state and local laws.
• Maximum transport speed for implement is 20 mph. Do
not exceed. Never travel at a speed which does not
allow adequate control of steering and stopping. Some
rough terrain requires a slower speed.
• Sudden braking can cause a towed load to swerve and
upset. Reduce speed if towed load is not equipped with
brakes.
• Use the following maximum speed - tow load weight
ratios as a guideline:
• 20 mph when weight is less than or equal to the weight
of tractor.
• 10 mph when weight is double the weight of tractor.
• IMPORTANT: Do not tow a load that is more than double
the weight of tractor.
• Protective clothing and equipment should be worn.
• Wear clothing and equipment appropriate for the job.
Avoid loose fitting clothing.
• Prolonged exposure to loud noise can cause hearing
impairment or hearing loss. Wear suitable hearing
protection such as earmuffs or earplugs.
• Operating equipment safely requires the full attention
of the operator. Avoid wearing radio headphones while
operating machinery.
• Escaping fluid under pressure can penetrate the skin
causing serious injury.
• Avoid the hazard by relieving pressure before discon-
necting hydraulic lines.
• Use a piece of paper or cardboard, not body parts, to
check for suspected leaks. Wear protective gloves and
safety glasses or goggles when working with hydraulic
systems.
• If an accident occurs, see a doctor immediately. Any
fluid injected into the skin must be treated within a few
hours or gangrene may result.
welcomes you to the growing family of new product
owners. This implement has been designed with care and
built by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of good use from the machine.
The Flail Mowers are designed for Category 1 - three point
hitch or Quick-Hitch System mounting. These Fixed Bar
Flail Mowers are ideal for ripping, leveling, finish grading,
and backfilling applications at feedlots, outdoor arenas,
building sites, and maintenance operations on farm and
ranch lanes or roadways.
• This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• Riders obstruct of operator’s view, they could be struck
by foreign objects or thrown from the machine.
• Never allow children to operate equipment.
• Be prepared if a fire starts.
• Keep a fist aid kit and fire extinguisher handy.
• Keep emergency numbers for doctor, ambulance, hospi-
tal and fire department near phone.
• Understand procedure before doing work. Use proper
tools and equipment. refer to Operator’s Manual for
additional information.
• Work in a clean dry area.
• Lower the implement to the ground, put tractor in park,
turn off engine, and remove key before performing main-
tenance.
• Allow implement to cool completely.
• Do not grease or oil implement while it is operation.
• Inspect all parts. Make sure parts are in good condition
and installed properly.
• Remove buildup of grease, oil or debris.
• Remove all tools and unused parts from implement
before operation.
To Next Page
Loading...