To Next PageTo Next PageWhy is there low or no suction with my Medalab Breast Pump?
Low or no suction can occur for several reasons. First, ensure that all pump set components are clean and dry and that all connections are secure. When pumping, verify the breast shields form a complete seal around the breast. If you are single pumping, make sure the unused tubing end is correctly plugged into the tubing holder.
What to do if the status light is flashing red on my Medalab Breast Pump?
A rapidly flashing red status light during pumping or charging indicates that the battery temperature is too high, making charging or pumping impossible. Allow the pump unit to cool down before resuming.
What to do if my Medalab Breast Pump is not responding as expected?
If your breast pump isn't responding as expected, switch the breast pump off by pressing and holding the On/Pause/Off button for two seconds, then restart it.
How to fix Medalab Breast Pump not working after pressing the On/Pause/Off button?
If your breast pump isn't working after pressing the On/Pause/Off button, charge it for 15 minutes before restarting. Charging is indicated by the status light pulsing in green.
General| Brand | Medalab |
|---|---|
| Model | Swing Maxi |
| Category | Breast Pump |
| Language | English |
Instructions for cleaning pump parts and bottles before the first use of the breast pump.
Details on how to charge the breast pump battery, including charging time and status light indicators.
Explains the difference between washing and sanitising pump parts, and provides detailed instructions.
Provides instructions on how to clean the pump unit safely, avoiding water immersion and direct liquid spraying.
Guidance on measuring nipple diameter and selecting the appropriate breast shield size for proper fit.
Step-by-step instructions for assembling the breast pump set components, including cautions for hygiene and safety.
Explains the 2-Phase Expression technology that mimics a baby's natural sucking rhythm for efficient milk expression.
Detailed instructions on how to express breast milk, including adjusting vacuum levels and transitioning between phases.
A table listing common problems with the breast pump and their corresponding solutions or recommended actions.
