To Next Page
K
karen89Sep 16, 2025
Why are the running lights on my Medema Mini Crosser M2 on?
- JJoseph AndersonSep 16, 2025
Remove the charger.
Why are the running lights on my Medema Mini Crosser M2 on?
Remove the charger.
What to do if the Mini Crosser Mobility Aid will not go, but the battery indicator is lit?
If your Mini Crosser won't start but the battery light is on, try waiting about a minute before trying again. Ensure the vehicle is turned off and remove the charging plug. Also, make sure the handbrake is released.
What to do if the thermometer symbol is half-red and flashes on my Medema Mobility Aid scooter?
If the thermometer symbol is half-red and flashing, and your scooter is running at half speed, immediately pull over to a safe location away from traffic and stop the Mini Crosser. Wait for the temperature icon to disappear, which should take about 3-5 minutes. Then, turn the Mini Crosser off and on again to resume at full speed.
Why is the driving distance per charge too short on my Medema Mobility Aid?
If you're experiencing a short driving distance per charge, make sure to fully charge the batteries and verify that the green light on the charger is illuminated before you start driving. Also, ensure the tires are inflated to the correct pressure.
What does 1 lamp mean on my Medema Mini Crosser M2 Scooter?
Check all connections between the controller and batteries. If these are fine, try charging the batteries, because the batteries need charging or the connection to a battery is poor.
What does 2 lamps mean on my Medema Mini Crosser M2?
Check the connection between the motor and controller, because there is a poor connection to the motor.
What to do if my Medema Mini Crosser M2 won't go and the battery indicator is not lit?
If the Mini Crosser won't start and the battery indicator isn't lit, first, ensure the key is turned to start and wait 5 seconds before using the accelerator. If that doesn't work, the batteries may be completely flat, requiring a charge. Also, the control fuse may have blown, requiring a fuse replacement.
What to do if my Medema Mini Crosser M2 won't go, but the battery indicator is lit?
If the Mini Crosser won't start but the battery indicator is lit, make sure the charging plug has been removed and the handbrake is off. It's possible the Mini Crosser has been overloaded; wait about a minute before trying again.
What should I do if the "ready" lamp on the charger doesn't light up after charging my Medema Mobility Aid for 10-12 hours?
If the 'ready' lamp on the charger does not light up even after charging for 10-12 hours, try reconnecting the charger and repeating the charging process. Check again after half an hour. Also, ensure the charging plug is fully inserted and repeat the process.
What to do if the charging lamp on the charger does not light up when charging my Medema Mobility Aid?
If the charging lamp on the charger does not illuminate when connected to both the mains and the Mini Crosser, ensure that the switch is turned on.
Explains warning symbols, safety alerts, alarm system, and contagion notes.
Identifies and describes the components of the control panel.
Guides on navigating the user menu and programming basic settings.
Covers adjustments for seat height, rotation, and steering column.
Includes getting in/out, braking, driving tips, traffic rules, and EMC.
Guides on managing kerbs, ramps, hills, slopes, and difficult terrain.
Details general maintenance, battery charging, disposal, and storage.
Explains fuses, wheel changes, brakes, and solutions for common problems.
Lists comprehensive technical data for the scooter models.
Covers securing the scooter in vehicles, air travel, and towing.
Details various seat adjustments and programming functions.
General| Category | Scooter |
|---|---|
| Motor Power | 950 W |
| Brake Type | Electromagnetic |
| Foldable | No |
| Weight Capacity | 175 kg |
| Max Load | 175 kg |