Do you have a question about the Media Links MD8000 Series and is the answer not in the manual?
Brand | Media Links |
---|---|
Model | MD8000 Series |
Category | Network Hardware |
Language | English |
Crucial safety precautions for users and equipment to prevent harm and damage.
Specific safety warnings for the MD8000 Series, focusing on potential death or serious injury.
Information on regulatory compliance with FCC, Canada, and EU standards for digital devices.
Lists tested standards and EMC emissions/immunity compliance for the equipment.
Limits Media Links' liability for special, incidental, or consequential damages due to improper operation.
Lists other relevant manuals for the MD8000 system, such as the Multimedia Transport System Manual.
Provides Media Links Technical Support contact details including phone, fax, web, and email.
Details of 1Gbps Ethernet interface trunk boards, including capabilities and types.
Details of 10Gbps Ethernet trunk boards, including Jumbo frame support.
Details of 10G WAN trunk boards supporting SDH/SONET and Jumbo frames.
Information on STM1/OC3-2Trunk boards, including logical paths and Jumbo frame support.
Details on STM1/OC3-2Trunk boards with local switching functionality.
Information on STM4/OC12-2Trunk boards, including logical paths.
Details on STM4/OC12-2Trunk boards with STS1 logical path support.
Information on STM4/OC12-2Trunk boards with local switching functionality.
Details on STM16/OC48-2Trunk boards, including logical paths.
Information on STM16/OC48-2Trunk boards with local switching functionality.
Details on the STM64/OC192 trunk board, including its interface and frame handling.
Information on the VIF-Trunk board for SDI/HD-SDI video transport over Ethernet.
Details on 1GbE-2Sch boards for Ethernet to IP encapsulation and transport.
Information on 10GbE-1Sch boards for Ethernet to IP encapsulation and transport.
Details on AIF-2Sch boards for AES/EBU audio signal input and IP encapsulation.
Information on AIF-4Sch boards for AES/EBU audio signal input and IP encapsulation, supporting 5.1ch surround.
Details on E1/T1-4Sch boards for E1/T1 circuit signal encapsulation into IP frames.
Information on E1/T1-8Sch boards for E1/T1 circuit signal encapsulation into IP frames.
Details on FE-4Sch boards for 10/100Mbps Ethernet frames encapsulation into IP.
Information on J2K-1Sch (2022) boards for JPEG2000 video compression and IP transport.
Details on J2K-1Sch (2022VBR) boards for JPEG2000 video compression with variable bit rate.
Information on JPEG2K-1Sch boards for JPEG2000 video compression.
Details on JPEG2K-1Sch+OPT boards with optical I/O for JPEG2000 video compression.
Information on STM1/OC3-2Sch cards for SDH/SONET interface and IP encapsulation.
Details on UVTX-4Sch-J2K-2022 cards for 3G/HD/SD-SDI and DVB-ASI signal processing.
Information on UVRX-4Sch-J2K-2022 cards for 3G/HD/SD-SDI and DVB-ASI signal processing.
Details on UVTX-4Sch-SDI-2022 cards for SDI uncompressed signal processing.
Information on UVRX-4Sch-SDI-2022 cards for SDI uncompressed signal processing.
Details on UVTX-1Sch cards with H.264 compression for HD/SD/DVB-ASI signals.
Information on UVTX-2Sch cards with H.264 compression for HD/SD/DVB-ASI signals.
Details on UVRX-2Sch cards with H.264 compression for HD/SD/DVB-ASI signals.
Information on VIF-1Sch boards for HD/SD/DVB-ASI input and IP packet encapsulation.
Details on VIF-1Sch+OPT boards with optical I/O for HD/SD/DVB-ASI signals.
Information on VIF-1Sch(2022) boards for HD/SD/DVB-ASI input and IP packet encapsulation.
Details on VTX-4Sch boards for SD-SDI or DVB-ASI input and IP packet encapsulation.
Information on VRX-4Sch boards for SD-SDI or DVB-ASI output.
Details on VTX-4Sch (2022) boards for DVB-ASI input and IP packet encapsulation.
Information on VRX-4Sch (2022) boards for SD-SDI or DVB-ASI output.
Provides packet-level Hitless switching for signal streams, with redundant circuit support.
Enables high-bit-rate stream transportation using multiple low-bit-rate circuits with various algorithms.