Need help?Do you have a question about the Medica EasyLyte Na/K/Cl and is the answer not in the manual?
General| Measurement Parameters | Na+, K+, Cl- |
|---|---|
| Sample Type | Whole Blood, Serum, Plasma, Urine |
| Display | LCD |
| Measurement Method | Ion Selective Electrode (ISE) |
| Operating Temperature | 15 - 30°C |
| Sample Volume | 100 μL |
| Calibration | Automatic |
| Power Requirements | 100-240V AC, 50-60Hz |
Overview of the EasyLyte analyzer's function and capabilities.
Introduces the troubleshooting section and its methodology.
A chart to identify problems, their sources, and corrective actions.
Steps to verify AC power supply integrity and fuse status.
Procedures to check DC voltage outputs from the power supply.
Method for testing the analyzer's display assembly functionality.
Steps to verify the proper operation of the probe motor.
Procedure to test the functionality of the pump motor.
Steps to diagnose and resolve issues with the printer.
General guidelines and precautions before performing repairs.
Procedure to safely remove the power supply unit.
Steps for installing the power supply unit correctly.
Procedure to remove the CPU board from the analyzer.
Steps for correctly installing the CPU board.
A guide to diagnose and resolve EasySampler issues.
To Next Page