Need help?Do you have a question about the Medical Guardian MGMini and is the answer not in the manual?
General| Brand | Medical Guardian |
|---|---|
| Model | MGMini |
| Category | Personal Care Products |
| Language | English |
Details and functions of each component of the MGMini device, including buttons and indicators.
Various accessories provided with the MGMini for wearability and charging, such as lanyards and cables.
Plug USB into brick and cradle, connect to outlet. Green LED on cradle indicates power.
Place MGMini on charger. Device states 'Powered On'/'Charging'. LED shows status, solid green when fully charged.
Device states 'Device Ready' upon cellular connection. Complete setup by testing the device.
Press side button twice, then hold Help Button to connect to test center and speak name.
Press Help Button for 2s to initiate. Hold for 5s during beeps to cancel.
Device states 'Call in Progress', then 'Call connected'. Speak to operator. Call ends with 'Call completed'.
One press reports battery level and cellular signal strength (Good/Poor, Good/Low/Very Low).
Two presses test the device. Three presses pair with peripherals like pendants.
Four presses or a 4-second hold powers the device off. Hold 4s or charge to power on.
Details on LED behavior for Normal, Low Battery, Charging, Connectivity Issues, and Over The Air Updates.
Covers shower use, GPS/WiFi protection, two-way audio, and battery life up to 5 days.
Explains protection during charging via secondary pendants and the built-in cellular SIM.
Provides support website, phone number, social media links, and legal documentation.
To Next Page
