- 43 -
3. Two devices will be found and connected whenever
enter the right PIN code.
To use WPS for your device, your operating system
should be Windows Vista or Windows 7.
To use WPS for your device, your wireless LAN card,
station, router or Access Point should support WPS
function
Reset the unit
You can set the device back to the status at delivery, if it can
no longer be operated or errors arise.
Press on the RESET button with a pointed object (e.g.
a ball-point) for longer than 5 seconds to do this.
After 10 seconds the WLAN-LED and afterwards the
POWER-LED will turn off and then on again.
To Next Page
Loading...