Why is my Medion Washer not working?
Your Medion Washer might not be working due to several reasons: the water supply could be interrupted (turn on the stopcock), the door might not be closed properly (close the washing machine door), or the wash cycle might not have started yet (press the button).
How to fix Medion Washer when water supply is not working?
If the water supply to your Medion Washer is not working, the water supply might be interrupted (turn on the stopcock), the wash programme has not started yet (check the setting of the wash programme), the water pressure is too low (check the water pressure), the inlet hose is not firmly attached or has been kinked or otherwise blocked (reconnect the water hose), the door is not closed properly (close the washing machine door), or the water hose is not kinked or blocked (check that the water hose is not kinked or blocked).
What to do if Medion MD 37435 Washer doesn't clean clothes well?
If your Medion Washer isn't cleaning clothes well, it could be due to using too little detergent or not using enough for the water hardness (use the correct dosage of detergent for the degree of soiling and water hardness - see instructions on the detergent packaging), or the pump filter could be clogged (clean the pump filter).
What to do if water doesn't drain from Medion MD 37435 Washer?
If the water does not drain away completely from your Medion Washer, check the pump filter, as it may be clogged. Also, check the waste water hose, as it may not have been installed correctly or it was placed below the water level of the drum. The waste water hose should be at a height of 0.6 m to 1 m above the floor.
Why is there no water in my Medion MD 37435 Washer drum?
If there is no water in the drum of your Medion Washer, the water supply is probably interrupted. Turn on the stopcock.
How to reduce vibration in Medion Washer?
If your Medion Washer is vibrating, check that the transit bolts have been removed and level the washing machine, as it was not levelled when it was installed.
Why does my Medion MD 37435 Washer stop mid-cycle?
If your Medion Washer stops before the end of the wash programme, the power supply was interrupted or the water inlet or outlet was blocked. Check the power supply and the water inlet and outlet.
How to prevent foaming in Medion MD 37435 detergent compartment?
If foaming occurs in the detergent compartment of your Medion Washer, too much detergent was added or the amount of detergent was not adjusted for the hardness of the water. Reduce the amount of detergent used and use the correct dosage of detergent for the degree of soiling and water hardness (see instructions on the detergent packaging).
How to remove bad smell from Medion MD 37435 Washer drum?
If there is an unpleasant odour from the drum of your Medion Washer, wash residue has accumulated in the drum. Switch on a programme with a temperature of at least 60°C for self-cleaning.
Why is my laundry still wet after Medion MD 37435 Washer cycle?
If the laundry in the drum of your Medion Washer is still wet, put the laundry back into the drum and clean the pump filter.
Explains various danger, warning, caution, and notice symbols used in the manual.
Covers essential safety advice, including electrical safety, installation, and handling precautions.
Details potential risks of material damage and leakage due to incorrect installation or operation.
Warns about scalding from hot water and choking hazards from packaging materials.
Alerts to the danger of choking and suffocation from small packaging parts.
Illustrates and labels the components on the front and back of the washing machine.
Details the function of controls, buttons, and detergent compartments.
Guides on removing transit bolts and levelling the machine for stable setup.
Provides instructions on how to connect the washing machine to the cold water mains supply.
Details how to connect the drain hose and the power supply to the appliance.
Explains the initial wash cycle and guidelines for using detergents and finishing agents.
Advises on sorting laundry and understanding care symbols for proper washing.
Covers loading limits, water hardness, voltage, and laundry distribution control.
Explains the door lock mechanism and how to interpret machine displays and indicators.
Explains how to open the door, select programmes, and start the wash cycle.
Details how to use additional functions like delay start, pre-wash, and manage cycle interruptions.
Explains how to cancel programmes, end cycles, and use the safety lock feature.
Guides on cleaning the pump filter and water inlet valve to prevent clogs.
Instructions for cleaning the detergent dispenser and its inserts.
How to clean the housing, control panel, door, and perform drum self-cleaning.
Steps to take to protect the washing machine from freezing in cold environments.
Advice on preparing the machine for extended periods of non-use.
A table listing common issues and their corresponding solutions for self-resolution.
Explains how to interpret error codes displayed by the machine.
Provides instructions and precautions for moving and disposing of the washing machine.
States compliance with EU directives and instructions for obtaining the product data sheet.
Information on ordering spare parts and contacting customer service for support.
Contains copyright information and legal disclaimers regarding the manual.
Outlines how personal data is processed by the manufacturer.
To Next Page
General