Need help?Do you have a question about the Medonic CA530 and is the answer not in the manual?
Defines the product's purpose and requirements for proper use.
Lists conditions or environments where the instrument should not be used.
Outlines restrictions and conditions that may affect the instrument's warranty.
Covers electrical, biohazard, and contamination hazards associated with the instrument.
Provides steps to follow in case of an instrument malfunction or emergency.
Procedures for unpacking the instrument and checking contents.
Requirements for the instrument's operating environment and mains supply.
Steps for physical installation, mechanical checks, and component setup.
Description of the instrument's front panel controls and keys.
Instructions for filling the instrument with the necessary reagents.
Default configuration and mode selection for CA620-CellGuard.
Configuration steps for using the CA620-CellGuard in pre-donor screening mode.
Configuration steps for monitoring PLT concentrates with CA620-CellGuard.
Default configuration settings for CA620 and CA530 models.
Procedure for configuring the instrument's date, time, and date format.
Steps to set up the connected printer and define print formats.
Procedure to perform a background check before sample analysis.
Steps for analyzing whole blood samples using the open tube inlet.
Procedure for analyzing pre-diluted blood samples.
Instructions for using the Micro Pipette Adapter with capillary samples.
Steps for using the optional cap piercing device for closed tubes.
Switching between Blood and PLT concentrate modes on CA620-CellGuard.
How to access, view, and manage stored sample data and statistics.
Overview of instrument settings, calibration, and normal range definitions.
Access to less common settings like Machine ID, blood detector, and units.
Procedure for calibrating using a reference sample with known values.
Steps for calibrating the instrument using a certified calibrator.
Overview of Quality Control (QC) memory, X-B algorithm, and Levey-Jennings plots.
Troubleshooting issues related to high or low counting times (TU/TL).
Troubleshooting air in the metering unit indicated by 'LO' counting time.
Diagnosing low blank reference voltage flagged as 'LO' for HGB.
Diagnosing out-of-range blank reference voltage flagged as 'HI' for HGB.
Troubleshooting photometer offset voltage errors flagged as 'OF'.
Defines the product's purpose and requirements for proper use.
Lists conditions or environments where the instrument should not be used.
Outlines restrictions and conditions that may affect the instrument's warranty.
Covers electrical, biohazard, and contamination hazards associated with the instrument.
Provides steps to follow in case of an instrument malfunction or emergency.
Procedures for unpacking the instrument and checking contents.
Requirements for the instrument's operating environment and mains supply.
Steps for physical installation, mechanical checks, and component setup.
Description of the instrument's front panel controls and keys.
Instructions for filling the instrument with the necessary reagents.
Default configuration and mode selection for CA620-CellGuard.
Configuration steps for using the CA620-CellGuard in pre-donor screening mode.
Configuration steps for monitoring PLT concentrates with CA620-CellGuard.
Default configuration settings for CA620 and CA530 models.
Procedure for configuring the instrument's date, time, and date format.
Steps to set up the connected printer and define print formats.
Procedure to perform a background check before sample analysis.
Steps for analyzing whole blood samples using the open tube inlet.
Procedure for analyzing pre-diluted blood samples.
Instructions for using the Micro Pipette Adapter with capillary samples.
Steps for using the optional cap piercing device for closed tubes.
Switching between Blood and PLT concentrate modes on CA620-CellGuard.
How to access, view, and manage stored sample data and statistics.
Overview of instrument settings, calibration, and normal range definitions.
Access to less common settings like Machine ID, blood detector, and units.
Procedure for calibrating using a reference sample with known values.
Steps for calibrating the instrument using a certified calibrator.
Overview of Quality Control (QC) memory, X-B algorithm, and Levey-Jennings plots.
Troubleshooting issues related to high or low counting times (TU/TL).
Troubleshooting air in the metering unit indicated by 'LO' counting time.
Diagnosing low blank reference voltage flagged as 'LO' for HGB.
Diagnosing out-of-range blank reference voltage flagged as 'HI' for HGB.
Troubleshooting photometer offset voltage errors flagged as 'OF'.
General| Brand | Medonic |
|---|---|
| Model | CA530 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
