Medway Easy Toilet Riser User Manual

Turn o the water supply
to the to the toilet
Then ush the toilet.
Use a plunger and a
sponge to get the water
out of the bowl
Using a bucket, unhook
the water supply and
drain the remaining
water from the toilet’s
tank.
Remove the existing
closet bolts from the
toilet.
Remove the existing
toilet.
Remove the old wax ring
and closet bolts
Slide in the new extend-
ed 6 inch closet bolts in
the existing ange
Place one of the wax
rings provided in the kit
on top of the ange
Carefully install the
toilet riser over the
closet bolts
Apply pressure to the top
of the Riser to properly
seal the wax ring with
the existing oor ange
Place the second wax
ring on to the riser ange
(optional step) if you ordered the
Medway 19” Easy Toilet Riser
Place the 19” riser apron
over the base riser and
adjust as necessary to
accomodate your toilet
Reinstall the toilet on top
of the toilet riser
Apply pressure on the
bowl to properly seat the
toilet.
Install nuts and washers
Do not over tighten
Install the new water
supply line and turn on
the water
Congratulations! You can
now use your new raised
toilet!
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Remove your Existing Toilet Install the Easy Toilet Riser
Re-install your old Toilet
e Medway Easy Toilet Riser can normally
be installed in less than an hour by most
handy persons.

Medway Easy Toilet Riser Specifications

General

Brand	Medway
Model	Easy Toilet Riser
Category	Plumbing Product
Language	English

Summary

Remove Existing Toilet

Turn Off Water Supply

Turn off the water supply to the toilet.

Flush Toilet

Flush the toilet to remove water from the tank.

Drain Toilet Bowl

Use a plunger and sponge to remove water from the bowl.

Drain Tank Water

Unhook water supply and drain remaining water from the tank.

Remove Closet Bolts

Remove the existing closet bolts from the toilet.

Remove Toilet

Carefully remove the existing toilet.

Remove Old Wax Ring and Bolts

Remove the old wax ring and closet bolts.

Install Easy Toilet Riser

Install New Closet Bolts

Slide new extended closet bolts into the existing flange.

Place First Wax Ring

Place one wax ring on top of the flange.

Install Toilet Riser

Carefully install the toilet riser over the closet bolts.

Seat Riser with Wax Ring

Apply pressure to seal the wax ring with the floor flange.

Place Second Wax Ring

Place the second wax ring on the riser flange (optional).

Install Riser Apron

Place and adjust the 19" riser apron over the base riser.

Re-install Old Toilet

Reinstall Toilet on Riser

Reinstall the toilet on top of the toilet riser.

Seat Toilet Bowl

Apply pressure on the bowl to properly seat the toilet.

Install Nuts and Washers

Install nuts and washers to secure the toilet.

Avoid Overtightening

Ensure nuts and washers are not overtightened.

Install Water Supply

Install the new water supply line and turn on the water.

Congratulations

Your new raised toilet is ready for use.

Installation Requirements and Products

Tools and Materials Needed

List of tools and materials required for installation, including putty knife, trash bags, paper towels, and mineral spirits.

Medway Toilet Riser Kits

Information on Medway 14" and 19" Easy Toilet Riser Kits and their included components.