Need help?Do you have a question about the MEE AUDIO BTX1 and is the answer not in the manual?
Details the microphone component of the BTX1.
Controls volume increase and skipping to the next track.
Controls power, playback, calls, and voice assistants.
Controls volume decrease and returning to the previous track.
Shows device status via light signals.
Port for charging the device.
Connect the cable to the left and right earpieces.
Push connectors until they click and check for a secure fit.
How to remove the cable from the earpieces.
Press and hold the multifunction button until pairing mode is active.
Open the device's Bluetooth menu and search for devices.
Select "MEE audio BTX1" and confirm pairing.
Distinguish between the right and left earpieces.
Place the cable behind the neck and route earhooks over ears.
Insert earpieces and adjust for a comfortable, sealed fit.
Tighten the sliding cable cinch for a secure fit.
Controls volume increase and skipping to the next track.
Manages power, playback, calls, and voice commands.
Controls volume decrease and returning to the previous track.
Links to support guides, FAQs, and contact information.
Information on the manufacturer's warranty coverage.
Contact number and hours for phone assistance.
Email address for customer support inquiries.
To Next Page
General