MEE AUDIO RX18 - User Manual

RX18
Comfort-Fit
In-Ear Headphones
with Enhanced Bass
How to use
1. Select and install the correct eartips.
The RX18 is an in-ear headphone and relies
on a tight seal between eartip and ear canal
to deliver great sound and bass. Three sizes
of ear tips are included to ensure you get the
best fit. We recommend trying all of them and
selecting the ones with the best sound, bass
response, and comfort for your ears.
Install eartips as shown. Make sure eartips
are mounted securely before use.
2. Use the L/R markings to identify
the left and right earpieces. They
are not interchangeable. Put the
earphones in your ears ensuring
that the eartips fit completely
inside your ear canal. Adjust the
earpieces for an airtight seal.
3. When worn correctly,
the earphones will reduce
outside noise and deliver good
bass impact. If you do not get much bass
or hear tinny sound with excessive treble
presence, re-adjust the fit of the earphones in
your ears and/or try a different size of eartips.
For assistance, contact:
support@MEEaudio.com

Summary

How to Use RX18 Headphones

Selecting and Installing Eartips

Choose the correct eartips for a tight seal, optimal sound, bass response, and comfort.

Proper Earpiece Fitment

Use L/R markings and ensure eartips fit completely inside the ear canal for an airtight seal.

Optimizing Sound and Bass

Re-adjust fit or try different eartips if bass is low or treble is tinny.

Safety, Care, and Support Information

Cleaning and Maintenance

Clean earphones with a damp swab and rubbing alcohol; dry completely. Remove eartips for rinsing.

Handling Liquid Exposure

Wipe device immediately if wet. Do not power on if submerged until fully dry; this voids warranty.

Hearing Safety Warning

Avoid prolonged high volume use to prevent permanent hearing damage. Use moderate levels.

Contact and Warranty Details

Contact support for assistance or visit the website for warranty information.

MEE AUDIO RX18 Specifications

General

Type	In-Ear
Driver Type	Dynamic
Driver Size	10mm
Frequency Response	20 Hz - 20 kHz
Impedance	16 Ohms
Cable Length	1.2m
Connector	3.5mm