PAIRING NEW DEVICES
To manually enter pairing mode:
Remove right earpiece from case, press and hold the
button for 5 seconds to power it off, then press and hold
the button for 5 seconds again until the blue and white
lights flash indicating pairing mode.
Select “MEE audio X10”
in the Bluetooth menu of
the new device you wish
to pair to complete the
pairing process.
Pairing mode is
indicated by flashing
alternating blue and
white lights
Earpiece Indicator Lights
AT&T LTE
12:26 PM
95%
Bluetooth
Settings
MEE audio X10
Bluetooth
To Next Page
Loading...
