7
hood adjustment button
7.
Attach the carrycot adapters onto the connectors, situated on each side
of the chassis. Then insert the frame supports on the carrycot unit into
the adapters, ensuring the carrycot is parallel to the chassis before
pushing downwards. You will hear a “click” to indicate the carrycot is
locked in position.
To remove the carrycot, press the buttons on each side then lift
upwards. To remove the adapters, press the adapter button then pull.
To adjust the hood, press the button on each side, then rotate the hood
open or closed.
To assemble the carrycot, rst unzip the liner to access the carrycot
structure. Push the support bars outwards until they lock into the
location points. Zip the liner back into the carrycot and insert the
mattress.
Attention:
1.The carrycot is only suitable for children who are not yet
able to sit up or stand on their own.
2.Use only on rm, horizontal, level and dry surfaces.
3.When using the carrycot, the child's head should always be higher
than his body.
4.Ensure the handle is locked in position before carrying or lifting.
5.The carrycot must be used in conjunction with the adapters supplied.
To Next Page
Loading...
