Meec tools 002-368 - Product Description and Components; Description of Parts; Available Accessories; Assembly and Usage Guide

EN
19
4. Connect an appropriate nozzle.
FIG. 4
5. After use, store the accessories on the
back of the vacuum cleaner.
FIG. 5
USE
NOTE:
Never use the vacuum cleaner without a
HEPA lter.
1. Connect the vacuum cleaner plug to an
earthed power outlet.
2. Press the power switch to I to start.
3. Press the power switch to O to switch o.
HOSE CONNECTION
1. Connect the hose to the outlet 1 for
vacuuming.
2. Connect the hose to outlet 2 for blowing.
FIG. 6
MAINTENANCE
• Wipe o the vacuum cleaner with a
slightly damp cloth.
• Clean the dust compartment with a dry
duster/brush.
EMPTY THE DUST CONTAINER.
Empty the dust container when you have
nished.
1. Press out the top edge of the latches and
lift o the container lid.
2. Empty the container and ret the cover.
FIG. 7
TECHNICAL DATA
Voltage 230 V
Output 800W
Volume 12 l
Noise level 85 dB
Cord length 5 m
DESCRIPTION
1. Floor nozzle
2. Extension tube
3. Handle
4. Hose
5. Power switch
6. Carry handle
7. Latch
8. Nozzle storage
9. Wheel
10. Dustbin
11. Hose connection
FIG. 1
ACCESSORIES
12. Radiator nozzle for vacuuming in corners
and crevices
13. Brush nozzle - for vacuuming furniture,
curtains, etc
14. Floor nozzle - for vacuuming mats
15. Floor nozzle - for vacuuming hard oors
and for sucking up water
FIG. 2
ASSEMBLY
1. Press out the top edge of the latches and
lift o the container lid.
2. Insert the container’s castors in each hole.
FIG. 3
3. Insert and turn the handle in the exten-
sion tube.