Meec tools 005416 - Safety Instructions; Technical Data

EN
14
Approved in accordance with
the relevant EU directives.
This product has a safety
class II rating. This means it
is tted with extra or double
insulation.
Recycle as electrical waste.
DESCRIPTION
1. Motor housing
2. Sawdust container
3. Power switch, On/O
4. Sealing strip
5. Vacuum hose
6. Hose clips
7. Hose coupling Ø 100 mm
FIG. 1
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Motor speed 20000 rpm
Vacuum power P 1 1100W
Power output P 2 660W
Air power 183 m³/h
Vacuum hose Ø 100 x 2000 mm
Container 50 l
Filter area 0.3 m²
Weight 10 kg
Size 400 x 700 mm
Idling noise 80 dB
Sound pressure level, LpA 80.0 dB(A), K = 3 dB
Wear ear protection.
SAFETY INSTRUCTIONS
Follow these instructions to minimise the risk
of re, electric shock and personal injury.
• Operators must be well instructed in the
use of these machines.
• This machine is not suitable for collecting
up toxic dust.
• This machine is only intended for
collecting up dry sawdust.
• This machine is only intended to be used
and stored indoors.
• Extension cords must have a minimum
wire cross-sectional area of 1.0 square
millimetres.
• The mains connection must be fused with
a 16 A fuse.
• The connection and repair of electrical
equipment must only be carried out by an
electrician.
• The installed electric motor is ready to be
used. Its connection follows the relevant
VDE and DIN regulations.
Symbols
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
signicance.
Read the instructions.
Wear eye and ear protection.
Wear a dust lter mask.