Meec tools 015177 - OBDII SYSTEM; Reading of fault codes

EN
45
(no vehicle speed signal)
5. Engine coolant temperature (ECT) from 5 to 100°C.
6. Intake air temperature (IAT) higher than 5°C.
FIG. 26
Battery voltage: 0 V
Intake air temperature: 27°C
Coolant temperature: 48°C
Adaptation of the throttle unit: not OK
FIG. 27
Adaptation of the throttle unit in progress: yes
Press ESC to exit the function.
FIG. 28
- Adaptation of the throttle unit: OK
- Adaptation of the throttle unit in progress: no
FIG. 29
OBDII SYSTEM
Reading of fault codes
1. Use the up and down button to mark Read Codes in the diagnostic
menu and press OK to conrm.
FIG. 30
2. The fault codes and their signicance are shown in the display.
– Generic Current
– O2 sensor circuit low voltage bank 1, sensor 3
FIG. 31