Meec tools 015177 - UPPDATING

EN
50
4. Select item Update.exe. The following display image is shown.
FIG. 46
5. Click on Feedback.
FIG. 47
6. Send the le feedback.bin to support@autophlx.com.
DEVICE INFORMATION
Select the item Device Information. The following display image is
shown.
FIG. 48
UPPDATING
1. Download the updating software at www. autophlx.com.
2. Connect the product to the computer with a USB cable.
FIG. 49
3. The updating software is only supported by Windows 7, 8 and
10. Windows 8 and 10 can run the updating software directly,
but a drive routine must be installed for Windows 7. Follow the
instructions.
1. Click on the le driver.
2. Click on install driver.bat to install the drive routine.
3. Click on Update.exe.
FIG. 50