ENGLISH
13
TROUBLESHOOTING
In the event of any faults, use the troubleshooting chart below to rectify the fault.
Fault Cause Action
Leaks and does not spray
properly.
Seal damaged or not properly
tightened.
Replace seal, or tighten.
Too much resistance in the pump
arm.
Spray nozzle or filter clogged. Clean
Lubricate with Vaseline.
Pressure too low Dirt in the system. Clean
The pump arm does not produce
any pressure.
Ball seal missing Fit ball seal
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
To Previous Page