8
Change Ride Mode
The board is set in beginner mode by default. Before switching modes,
make sure you have mastered the beginner mode.
1: Limited acceleration.(7mph)
2: Moderate acceleration.(15mph)
3: High acceleration.(25mph)
4: Max acceleration.(32mph)
WARNING: The throttle wheel is much more sensitive in HI and PRO
modes. To avoid getting thrown off from the board, follow these tips:
• Start by moving forward slowly.
• Move the throttle wheel in small increments.
• Keep a wide stance on the board.
• Keep a low center of gravity.
• Lean forward when accelerating.
• Lean backward when braking.
It usually takes the remote several hours to get fully charged. If the board
and remote are charging at the same time, the remote will be charged
first.
CYCLE THROUGH SPEED MODES:
Press the function-button once to
change speed modes.
9
Get Ready to Ride
Downhill
Grates/Drains
Poor Visibility
Uphill
Tracks
Obstacles
Water
Larger Rocks
Night Riding
Gravel
Cracks
Traffic
Always wear a helmet.
Find a flat, paved area with no obstacles for your first ride.
Read and understand the entire manual.
For more details, check out our website: www.meepoboard.com.
Other protective equipment is highly recommended.
AVOID THESE OBJECTS AS THEY CAN MAKE YOU LOSE
CONTROL OR CRASH:
Your Meepo board has a lot of power. Follow these tips to ensure a safe
riding experience:
STANCE
Move the throttle wheel in small increments.
Keep a wide stance on the board.
Keep a low center of gravity.
Lean forward when accelerating.
Lean backward when braking.
BOARD TYPE
9028 9005
To Next Page
Loading...