EasyManua.ls Logo

MEEPO V3S - Preparing for Your First Ride; Essential Pre-Ride Checklist; Battery Pack Replacement Guide; Further Information and Support

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Get Ready to Ride
Downhill
Grates/Drains
Poor Visibility
Uphill
Tracks
Obstacles
Water
Larger Rocks
Night Riding
Gravel
Cracks
Traffic
Always wear a helmet.
Find a flat, paved area with no obstacles for your first ride.
Read and understand the entire manual.
For more details, check out our website: www.meepoboard.com.
Other protective equipment is highly recommended.
AVOID THESE OBJECTS AS THEY CAN MAKE YOU LOSE
CONTROL OR CRASH:
To insert a new battery pack, align the grooves on both ends of the
connector (board & battery pack).
Insert, connect, and adjust the two ends of the connector together. Make
sure to tighten the connector to make a good seal.
Ensure the connector lays flat within the accessory wire and the groove
of the board.
Replace and tighten the bolts with the hex wrench, and put the grip tape
back on.
10
Replace the Battery Pack
11
More Information Online
This manual is a quick start guide intended for someone with little experience
in riding electric skateboards. If you want to learn more on how to start riding,
superior riding skills, and solutions for riding problems, please visit our website:
www.meepoboard.com or send us an email at info@meepoboard.com.
GETTING STARTED
How to stand on the board
How to turn
How to find a good spot to practice
ADVANCED TECHNIQUES
How to footbrake
How to ride uphill and downhill safely
What to look for when riding through traffic
MAINTENANCE
Pre-ride inspection
Routine maintenance

Related product manuals