Safety Warning
Please disconnect the USB cable aer charging. Product should not de
charging in a long me.
Please use the charger or adaptor with output voltage and current(max)
5V/1A or 5V/1.5A and product original charging cadle for the product
charging. lf the output voltage and current of the charger exceeds the
requirement,it will cause severe damage to the product, and the product
warranty will be invalid.
Safety instrucons for use
To avoid hearing damage, keep the volume at a moderate level. Avoid
listening to music at loud volume levels for prolonged periods of me as
this may cause permanent hearing damage or hearing loss.
Do not use M1 when it is unsafe to do so. For example, while operang
a vehicle, cycling, crossing a road, or any acvity which requires your
aenon and ability to hear.
Note: If you are watching video while using your earbuds, your audio
may be slightly out of sync with your device.
Basic Specificaons of Earphone
Size: 23.6×16.5×26.7mm
Weight: 4.5g
Earbuds Charging Current:55mA
Earbuds Charging me: 1 hour
Working Voltage: 3.3V~4.2V
Standby me: about 40 hours Music Time:2~2.5 hours
Talking Time:2 hours
Bluetooth version: Bluetooth 4.2
Support Profile: HSP, HFP, A2DP, AVRCP
RF transmit: Class-2
Transmission Range (Hz): 2.40GHz ~ 2.48GHz
Transmission distance: 10m
Audio sampling accuracy: 16bits
Audio sampling rate: 44.1~48kHz
Audio encoding format: CVSD、MSBC、SBC、AAC
SNR: >95dB
Working temperature: -15℃～+60℃
Working humidity: 10%~85%( in a non-frozen state)
Earbud Speaker Specificaons
Speaker specificaons / mode: Φ6mm
Impedance: 16Ω/ TYP.
Frequency(Hz): 20Hz～20KHz
Sensivity: 93±3dB
Input Power: 2.0mW (Normal), 5mW (Maximum)
Earbud MIC Specificaons
1.MIC type: Silicon MIC
2.MIC sensivity: -42±3dB
3. SPL：130dB
Basic Specificaons of Charging Case
Size: 59*34*24mm Weight:27g
Charging Port: Micro
Charging base(Full) provide power to earphone: 2 mes
Charging me : 2hrs
To Previous Page
Loading...